Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

NSK 6000zz Bearing

Double Row 21.29
737758 4 Bolt Square Flange

6 mm x 19 mm x 6 mm NSK 126 self aligning ball bearings

Double Row 21.29
737758 4 Bolt Square Flange

35 mm x 72 mm x 23 mm FAG 2207-2RS-TVH self aligning ball bearings

B04334 0
TIMKEN 0.0

35 mm x 80 mm x 21 mm NKE 1307 self aligning ball bearings

1.4 46 mm
4 mm 0.41 Hz

65 mm x 140 mm x 33 mm SKF 1313EKTN9 self aligning ball bearings

N/A 0.0
NSK 0.4

65 mm x 120 mm x 31 mm ISO 2213K self aligning ball bearings

N/A TIMKEN
Bearings TIMKEN

35 mm x 80 mm x 31 mm NSK 2307 self aligning ball bearings

Single Row Ball Bear 4012802227703
ABEC 1 | ISO P0 Metric

30,000 mm x 72,000 mm x 27,000 mm SNR 2306EEG15 self aligning ball bearings

1 mm 1 mm
69,000 N Open

65 mm x 140 mm x 33 mm NTN 1313S self aligning ball bearings

5.607 0800675025915
Roller Bearings PT INTERNATIONAL

120 mm x 215 mm x 42 mm ISO 1224 self aligning ball bearings

0.984 Inch | 25 Mill No
Phenolic Not Applicable

95 mm x 200 mm x 67 mm FAG 2319-K-M-C3 self aligning ball bearings

5.039 Inch | 128 Mil 31171536
0.0 116.843
1/18